Connect with us

Published

on

Are you considering buying a new household appliance? Here’s a guide to understanding Energy Rating Labels so you can gauge the energy efficiency of various options. So, how do you look for Energy Star ratings on appliances? 

Before purchasing, checking the Energy Rating Label can improve energy efficiency and cut energy bills. Typically marked in red, black, and yellow, these labels are found on many household appliances. 

Energy Rating Labels inform how efficiently an appliance uses energy and estimate its annual energy consumption, allowing you to compare models easily. 

An appliance with more stars indicates higher energy efficiency, while a lower energy consumption number means it uses less power overall. 

The Australian government regulates the Energy Rating Label, which has been used for over 30 years. It allows you to compare various appliances’ energy efficiency and operating costs.

How to read the Energy Rating Label? Understanding Energy Star Ratings on Appliances​

The Energy Rating Label helps you make better choices when buying appliances. It gives you two key pieces of information: 

  • Star Rating 
  • Energy Consumption

What is the Energy Star Rating?

energy ratings

Energy-star-rated appliances determine how efficient they are with energy—that is, how much energy they use compared to similar products. More stars mean higher efficiency. The more stars an appliance has, the less power it will need, saving you money on your bills. 

Most products have between 1 and 7 stars. However, as technology improves, some super-efficient models have a row with stars up to 10.  

What does Energy Consumption Mean?

Energy consumption is the yearly electricity a model uses, measured in kilowatt-hours (kWh). This is based on standard tests required by law and follows official Australian Standards.  

These tests reflect typical usage, though your actual use may vary. The label also assumes how often the appliance is used, like the number of washes per week for a washing machine or daily hours for a TV.  

You can use this energy consumption figure to compare any model, regardless of size or features.

Estimate Your Running Costs

With the energy consumption number, you can estimate how much it will cost to run an appliance each year. Use this formula: 

Annual running cost = Total energy consumption (kWh) × Electricity rate (dollars per kWh) 

Your electricity rate is listed on your bill. You can also visit the Australian Energy Regulator website to learn more about rates.  

Where Can You Find the Energy Rating Label? Which Appliances Have Energy Rating Labels?

In stores, you’ll find the Energy Rating Label on: 

  • Dryers 
  • Washing Machines 
  • Computer Monitors 
  • Dishwashers 
  • Refrigerators and Freezers 
  • Pool Pumps 
  • Televisions 

Ask the salesperson if the label isn’t displayed in the store before purchasing. Although the label doesn’t need to be shown for online purchases, most retailers provide this information because customers value it.  

If you can’t find the energy efficiency details on a website, you can email or call the retailer to ask. 

Upgrading Appliances: Star Rating Guide

When you’re ready to upgrade big appliances, use Energy Star Ratings to pick a model that can help lower your energy bills. Here’s an easy guide to using star ratings to your advantage. 

If your freezer breaks on a hot day, you might focus on saving your food rather than energy efficiency. But, when getting new appliances, it’s smart to consider greener options.  

Many common household appliances have Energy Star Ratings. Manufacturers test their products’ energy efficiency, helping you understand their cost. 

Paying attention to this rating is helpful when upgrading. Each extra star can reduce a product’s energy use by 10-30%, depending on the appliance type. 

How to Compare Energy Star Ratings on Appliances

Energy ratings must be shown on the product to compare it while shopping. You can also visit the Energy Star website and find energy-efficient models at home. 

Most appliances are rated out of six stars, but some super-efficient fridges and air conditioners can go up to 10 stars. More stars mean higher efficiency. 

Ratings also consider size. For example, a large dishwasher will use more energy than a small one but will still get a higher rating. 

To save the most, choose a model with low yearly energy use, listed in kilowatt-hours (kWh). This amount is based on average usage, but if you use an appliance a lot, you may use more energy than shown.

Use Energy Star Ratings at Home

You can also use star ratings to check the efficiency of your current appliances. Look at the ratings on your appliances. If the stickers are gone, check the Energy Star website. 

If you have an energy-hungry air conditioner or dryer, you’ll know which upgrades could help you save more. 

You can make the most of efficient appliances with the right energy plan. For further assistance, try the Energy Rating Calculator.  

Fundamental Features of Energy-efficient Electrical Appliances

Each appliance type has certain features that make it more energy-efficient: 

  • Refrigerators: Look for models with proper insulation, power-saving modes, and accurate temperature controls. Avoid side-by-side models, as they usually use more energy. 
  • Washing Machines: Front-loading models generally use less water and energy. Look for features that adjust water levels to match the load size and high spin speeds to shorten drying time. 
  • Dishwashers: Soil sensors can adjust the wash cycle based on the dirty dishes, saving water and energy. Eco-wash cycles and air-dry options also help cut down on energy use. 
  • Heating and Cooling Systems: Choose HVAC systems with high Seasonal Energy Efficiency Ratio (SEER) and Energy Efficiency Ratio (EER) ratings. Programmable thermostats can also help save energy. 

Things to Consider Before Getting Energy-efficient Appliances

To make a smart choice, keep these tips in mind: 

  • Assess Your Needs: Consider which appliance features matter most to you and your daily life. 
  • Read Reviews: Check customer reviews for performance, reliability, and energy savings insights. 
  • Compare Models: Use online tools or calculators from energy-saving groups to compare different models’ costs and savings over time.  

Cost and Savings Analysis

Buying energy-efficient appliances often costs more upfront, but they save money in the long run: 

  • Long-term Savings: Although they may cost more initially, the lower utility bills can balance this cost. For instance, an Energy Star fridge can save about $300 in energy costs over its lifetime compared to older models. 
  • Payback Periods: The time it takes for savings to cover the cost difference (the payback period) depends on the appliance and your usage. Generally, energy-efficient appliances pay for themselves within a few years.  

Environmental Impact

Choosing energy-efficient appliances helps reduce your home’s carbon footprint: 

  • Reduced Energy Use: These appliances use less power, reducing demand from power plants that rely on fossil fuels. 
  • Lower Greenhouse Gas Emissions: Less energy use means fewer carbon emissions, lessening your home’s environmental impact. 

Technology for Better Energy Management

Technology can help you manage your home’s energy more effectively: 

  • Smart Thermostats: These devices learn your routines and adjust heating and cooling to avoid unnecessary energy use. 
  • Energy Management Systems: Systems that monitor and control all your appliances help you see where you use the most energy and suggest ways to cut costs. 
  • Remote Control Apps: Many smart appliances have apps that let you control them remotely. This allows them to run only when needed, saving energy.  

Regular Maintenance for Optimal Performance

heating and cooling

Keeping energy-efficient appliances in good shape is essential to ensure they work their best: 

  • Scheduled Cleaning: Regularly clean appliances to remove dust and debris that can make them work harder. For example, cleaning the refrigerator’s condenser coils helps it use less energy. 
  • Timely Repairs: Fix issues as soon as they arise. Even efficient appliances, like a dishwasher with a broken heating element, use more energy if they’re not working properly. 
  • Seal and Gasket Checks: Check seals and gaskets, like those on fridge and oven doors, and replace them if worn to prevent air leaks and wasted energy.  

The Importance of Energy Audits

An energy audit can help improve your home’s energy efficiency. Here’s how: 

  • Identifying Inefficiencies: A professional energy auditor can find areas where your home loses energy and suggest fixes, like switching to more efficient appliances. 
  • Customised Energy-saving Strategies: You can create a specific plan to lower your home’s energy use based on audit results. 
  • Monitoring Improvements: After an audit, track your energy use over time to see the effect of changes and fine-tune your energy-saving approach. 

Cyanergy can assist customers by providing energy-efficient products that reduce energy usage and lower utility bills.  

We offer expert guidance that best suits each customer’s needs. Our focus is on products with high Energy Star Ratings for maximum savings. Talk to an expert 

Cyanergy’s solutions empower customers to make informed decisions that positively impact their energy costs and reduce their carbon footprint. Get a free quote to get the best energy-efficient products.   

Your Solution Is Just a Click Away

The post How Do You Look for Energy Star Ratings on Appliances? appeared first on Cyanergy.

https://cyanergy.com.au/blog/how-do-you-look-for-energy-star-ratings-on-appliances/

Continue Reading

Renewable Energy

North Sea Summit Commits to 100 GW Offshore Wind

Published

on

Weather Guard Lightning Tech

North Sea Summit Commits to 100 GW Offshore Wind

Allen covers Equinor’s Hywind Tampen floating wind farm achieving an impressive 51.6% capacity factor in 2025. Plus nine nations commit to 100 GW of offshore wind at the North Sea Summit, Dominion Energy installs its first turbine tower off Virginia, Hawaii renews the Kaheawa Wind Farm lease for 25 years, and India improves its repowering policies.

Sign up now for Uptime Tech News, our weekly newsletter on all things wind technology. This episode is sponsored by Weather Guard Lightning Tech. Learn more about Weather Guard’s StrikeTape Wind Turbine LPS retrofit. Follow the show on YouTubeLinkedin and visit Weather Guard on the web. And subscribe to Rosemary’s “Engineering with Rosie” YouTube channel here. Have a question we can answer on the show? Email us!

There’s a remarkable sight in the North Sea right now. Eleven wind turbines, each one floating on water like enormous ships, generating electricity in some of the roughest seas on Earth.

Norwegian oil giant Equinor operates the Hywind Tampen floating wind farm, and the results from twenty twenty-five are nothing short of extraordinary. These floating giants achieved a capacity factor of fifty-one point six percent throughout the entire year. That means they produced power more than half the time, every single day, despite ocean storms and harsh conditions.

The numbers tell the story. Four hundred twelve gigawatt hours of electricity, enough to power seventeen thousand homes. And perhaps most importantly, the wind farm reduced carbon emissions by more than two hundred thousand tons from nearby oil and gas fields.

Production manager Arild Lithun said he was especially pleased that they achieved these results without any damage or incidents. Not a single one.

But Norway’s success is just one chapter in a much larger story unfolding across the North Sea.

Last week, nine countries gathered in Hamburg, Germany for the North Sea Summit. Belgium, Denmark, France, Britain, Ireland, Luxembourg, the Netherlands, Norway, and their host Germany came together with a shared purpose. They committed to building one hundred gigawatts of collaborative offshore wind projects and pledged to protect their energy infrastructure from sabotage by sharing security data and conducting stress tests on wind turbine components.

Andrew Mitchell, Britain’s ambassador to Germany, explained why this matters now more than ever. Recent geopolitical events, particularly Russia’s weaponization of energy supplies during the Ukraine invasion, have sharpened rather than weakened the case for offshore wind. He said expanding offshore wind enhances long-term security while reducing exposure to volatile global fossil fuel markets.

Mitchell added something that resonates across the entire industry. The more offshore wind capacity these countries build, the more often clean power sets wholesale electricity prices instead of natural gas. The result is lower bills, greater security, and long-term economic stability.

Now let’s cross the Atlantic to Virginia Beach, where Dominion Energy reached a major milestone last week. They installed the first turbine tower at their massive offshore wind farm. It’s the first of one hundred seventy-six turbines that will stand twenty-seven miles off the Virginia coast.

The eleven point two billion dollar project is already seventy percent complete and will generate two hundred ten million dollars in annual economic output.

Meanwhile, halfway across the Pacific Ocean, Hawaii is doubling down on wind energy. The state just renewed the lease for the Kaheawa Wind Farm on Maui for another twenty-five years. Those twenty turbines have been generating electricity for two decades, powering seventeen thousand island homes each year. The new lease requires the operator to pay three hundred thousand dollars annually or three point five percent of gross revenue, whichever is higher. And here’s something smart: the state is requiring a thirty-three million dollar bond to ensure taxpayers never get stuck with the bill for removing those turbines when they’re finally decommissioned.

Even India is accelerating its wind energy development. The Indian Wind Power Association welcomed major amendments to Tamil Nadu’s Repowering Policy last week. The Indian Wind Power Association thanked the government for addressing critical industry concerns. The changes make it significantly easier and cheaper to replace aging turbines with modern, more efficient ones.

So from floating turbines in the North Sea to coastal giants off Virginia, from island power in Hawaii to policy improvements in India, the wind energy revolution is gaining momentum around the world.

And that’s the state of the wind industry for the 26th of January 2026.

Join us tomorrow for the Uptime Wind Industry Podcast.

North Sea Summit Commits to 100 GW Offshore Wind

Continue Reading

Renewable Energy

God’s Proud of Trump?

Published

on

Based on the polls, we can see that most of the American people have a seething hatred of Trump, but at least God thinks he’s done a good job.

God’s Proud of Trump?

Continue Reading

Renewable Energy

Maximise Government Rebates for Commercial Solar in 2026

Published

on

If you live in Australia, you might have heard the rumours that commercial solar rebates are being phased out.

Just got thinking if your business has missed its chance to cash in on government support?

Hold on! Let’s set the record straight: the government rebates and incentives are still active, and in 2026, they’re more strategic than ever.

Australia remains a global leader in rooftop solar, but the rules of the game have evolved. It’s no longer just about covering your roof with solar panels and exporting cheap power to the grid.

In 2026, the smart move is pairing commercial solar with battery storage, demand management, and tax planning to maximise savings and control when and how your business uses energy.

From small cafes and warehouses to large manufacturing facilities and corporate headquarters, businesses of all sizes can still unlock substantial rebates, tax incentives, and funding opportunities.

The main goal is to understand how the current program works and how to stack them correctly before the rebates end.

Therefore, this guide breaks down how to maximise government rebates for commercial solar in 2026 in Australia, so you can slash power bills, boost energy independence, and make every incentive dollar count.

Let’s dive in!

Understand the Federal Government’s Core Incentive Options

At the national level, Australia’s federal government continues to support commercial solar through several key programs. The rebate program includes:

Small-scale Renewable Energy Scheme (SRES)

This is one of the most popular commercial solar rebates across Australia. Under the SRES, eligible solar systems that are up to 100 kW generate Small-scale Technology Certificates.

These certificates are tradable and provide upfront discounts when you install solar. Your installer usually handles the paperwork, and the value is passed as a discount during installation.

Why does this matter for business owners?

STCs can directly reduce your upfront costs by tens of thousands, making solar a much more affordable long-term investment. This might sound exciting to many. But act sooner rather than later.

Why?

Because the value of STCs gradually decreases as we approach the RET (Renewable Energy Target) end date in 2030.

So, planning a 2026 installation can secure more certificates at higher values.

Large-scale Generation Certificates (LGCs)

For bigger commercial solar systems above 100 kW, it’s a different story. These systems fall under the Large-scale Renewable Energy Target and generate LGCs based on the electricity they produce each year.

These certificates are sold in the market, generating ongoing revenue, not just an upfront discount.

Why are LGCs a great option?

  • Provide cash flow over many years.
  • Can often outweigh STC savings for larger systems.

If your roof can support a system over 100 kW, you can easily scale up to access LGCs and create an annual income stream rather than just an upfront rebate.

New Federal Battery Rebate

From mid-2025, the federal government introduced battery rebates under the SRES framework, which continue into 2026.

In this battery home program, systems paired with solar can receive rebates for each usable kWh of storage installed up to 50 kWh.

This helps to:

  • Reduces battery cost by approximately 30%.
  • Enhances the value of your solar by allowing you to use more of the energy you generate rather than exporting it at a discount.

Pair solar with batteries wherever profitable. Solar alone saves you money, but paired with batteries, your business becomes more resilient and less exposed to low grid pricing.

How Can You Stack State & Territory Rebates and Grants?

Federal incentives are powerful, but stacking them with state-level rebates and grants can multiply savings.

Here’s what’s active or expected to continue in 2026:

New South Wales (NSW)

NSW supports commercial solar and batteries with:

  • STC rebates on solar.
  • Reset Peak Demand Reduction Scheme (PDRS) rebates for batteries. $1,600–$2,400 in addition to bonuses for VPP participation.

Here’s a pro tip! If you add a VPP-ready battery to existing or new solar installations, you can claim both state and federal rebates.

Victoria

Victoria continues its Solar for Business initiatives with:

  • Rebates for smaller commercial systems.
  • Interest-free loans and technical support.
  • Extra funding to encourage SME solar adoption.

You can pair your Victorian rebate with federal STCs and depreciation allowances for the best stack.

Queensland

Queensland has regional programs such as:

  • Energy audits for businesses.
  • Co-contribution grants.
  • Targeted agricultural support to reduce daytime energy costs.

Regional businesses often qualify for multiple small grants, so schedule an audit early in your planning to identify all available incentives.

Turn Australian Tax Deductions into Business Advantage: Here’s How!

Government support isn’t just limited to rebates; tax incentives can be just as valuable.

Instant Asset Write-Off & Temporary Full Expensing

Businesses installing solar can often write off the full cost of the system in the year it is installed, resulting in significant reductions in taxable income. This also:

  • Improves cash flow in the year of investment.
  • Can stack with rebates.

Before installing, consult your solar installer to ensure you’re claiming the maximum allowable deduction and that the structure aligns with your business’s tax year.

Standard Depreciation

Even if you don’t qualify for instant write-offs, solar is still a depreciating asset. You can claim deductions over its useful life, typically 20+ years, blending your return through ongoing tax savings.

Let’s Explore Strategic Funding & Innovative Financing Methods

You don’t have to own the system outright to enjoy the benefit:

Environmental Upgrade Agreements (EUAs)

There are councils, such as Environmental Upgrade Agreements (EUAs), that link loans to your property, allowing you to finance energy upgrades through your rates rather than traditional debt, often at better rates and longer terms.

In this method, solar starts saving money immediately, and a new cash-flow strategy makes solar accessible even without large upfront capital.

Power Purchase Agreements (PPAs)

With a PPA, a third party installs and owns the solar system, and you buy the energy at a reduced rate for 7–15 years.

What are the benefits:

  • Zero upfront cost.
  • Consistent electricity pricing.
  • Reduced risk.

A PPA may not generate STCs for you, but it can reduce out-of-pocket costs and be more financially advantageous for smaller businesses or those with constrained budgets.

Plan Your Install with Timing & Market Awareness

If you plan to install solar on your commercial property, timing is very crucial. The reason is simple and straightforward.

  • The rebate values decline over time. The SRES scheme reduces the number of certificates annually as 2030 approaches.
  • The battery rebates also step down periodically.

Therefore, all you need to do is book an appointment early, obtain free quotes, sign contracts, and schedule installations early in the financial year to secure the highest possible rebate.

How To Qualify for Maximum Returns?

In Australia, if you want to qualify for federal incentives, you must follow these two rules:

  • Panels and inverters must be Clean Energy Council (CEC) approved.
  • Installer must be accredited (Solar Accreditation Australia or equivalent).

Be aware! Skipping an accredited installer or choosing low-quality equipment can disqualify you from getting rebates, so always verify credentials and approvals.

Financial Metrics That Matter: Cash Flow, ROI & Payback

Understanding your commercial solar project isn’t just about grabbing rebates; it’s about making them count. Here’s how to approach it:

Build a 10-Year Financial Model

Include:

✔ Upfront costs before rebates
✔ Rebate cash inflows (STCs, state grants, battery subsidies)
✔ Tax deductions
✔ Avoided electricity purchases
✔ Revenue streams (LGCs for large systems)

Then calculate:

  • Payback period
  • Net Present Value (NPV)
  • Internal Rate of Return (IRR)

In most cases, businesses with high daytime usage see paybacks in 3–6 years, which is far better than traditional capital investments.

End Notes

Beyond rebates and tax savings, commercial solar boosts your business in ways that don’t show up on a spreadsheet instantly. It brings:

Brand credibility: Customers increasingly want sustainable partners.

Energy resilience: During peak grid pricing or outages, solar + battery keeps the lights on.

ESG leadership: If you report on environmental goals, solar is a visible, measurable contribution.

By 2026, Australia’s commercial solar incentives will still be robust, but navigating them takes strategy:

Do this first:

  • Understand federal incentives (STCs, LGCs, battery rebate)
  • Explore state rebates and stacking opportunities
  • Talk to your accountant about tax deductions
  • Get multiple quotes and install early in the year
  • Choose an accredited installer and products

And then:

✔ Consider financing alternatives like EUAs or PPAs
✔ Build a financial model before signing on the dotted line
✔ Look beyond dollars to brand and operational resilience

Finally, the clean energy transition isn’t just an environmental choice; it’s a smart commercial move. With thoughtful planning and the right rebate stack, commercial solar in 2026 can be one of the most lucrative sustainability investments your business makes.

Ready to go solar?

Start with a trusted installer like Cyanergy, get a tailored quotation, and lock in every available rebate before they step down.

Your Solution Is Just a Click Away

The post Maximise Government Rebates for Commercial Solar in 2026 appeared first on Cyanergy.

https://cyanergy.com.au/blog/maximise-government-rebates-for-commercial-solar-in-2026/

Continue Reading

Trending

Copyright © 2022 BreakingClimateChange.com