Connect with us

Published

on

Whether you just did a closet clean-out or you’ve just noticed a few pieces are looking a bit too tired for repair, you might be wondering what do I do with these old clothes?

The Clothing Waste Problem

In the United States, the EPA reported that nearly 67% of discarded textiles are landfilled and 19% were incinerated with less than 15% being recycled. Those stats mean that 14,520,000 tons of textiles were landfilled or burned in the year 2018 alone (which was the last year that textile waste numbers were reported by the EPA).

Plus, there isn’t actually much if any textile-to-textile recycling infrastructure that exists at scale yet, so most textile recycling is technically downcycling. This is where textiles are shredded and turned into things like carpeting or insulation. While it’s better than the landfill, it’s not always the best scenario for textiles (especially when they’re still in decent condition).

Given the state of textile recycling, you might be thinking ok, let’s donate it!?

Unfortunately only a small percentage (estimates range from 10-20%) of the clothes you donate are sold in the charity shops themselves.

A significant amount of the donated clothes end up getting exported to countries in the Global South like Chile, Kenya, and Ghana where they do not have the demand to sell all of that clothing nor the infrastructure to process the volume of clothing.

And these countries certainly do not have the textile recycling infrastructure to handle the amount of old, worn-out low-quality clothing that the Global North is dumping.

What Do We Do With These Old Clothes Then?

While the typical suggestions for what to do with old clothes fall flat, that doesn’t mean we should give up — this guide exists to help you find sustainable ways to manage these unwanted garments and other pieces.

Step one: determine if it’s really a no or actually a “maybe”.

Sometimes when we’re in the midst of a closet declutter or just feeling overwhelmed by our wardrobe, it can be tempting to get rid of all of our “maybe” pieces. I’ve certainly done this from time to time.

While I love a streamlined wardrobe, I have regretted getting rid of particular pieces in the past. I felt like I gave up on some gems too soon! So now I like to implement a pause before decluttering my “maybe” pieces.

What’s a “maybe” piece? This is a personal decision, but for me this category involves:

  • Pieces that I’ve worn in the past that I got tired of
  • Pieces that I do love alone, but don’t know how to style yet
  • Pieces that have just 1 or 2 things off about them

Essentially, “maybe” pieces are items that still have potential.

So to try to determine if it’s really time to say goodbye to that item, I first follow these practices:

If it’s an item I’m tired of wearing…

I’ll put it away for a season or two. It’s surprising how many items I’ve ended up loving again by just taking a break from seeing it in my closet every single day.

If it’s an item I don’t know how to style quite right…

I turn to Pinterest!

Outfit ideas for unwanted clothes

I like to search for that item on Pinterest + the term “outfit ideas”.

For example, if I have a sweater vest in my maybe pile that I want to wear more, I might search “sweater vest outfit ideas”.

I’ll save a few of the Pins that stand out to me and see how I might be able to emulate some of those looks.

You don’t have to own the exact pieces that are shown in the images but think about if you have something that could be similar and do a little try-on session.

If there is just one or two things off about a piece…

I consider if these things are fixable. Can I take my trousers to a tailor to get hemmed? If a v-neck is too low for my liking, can I add a snap closure?

Or I consider if I can wear those items in a different way. For example, does that fitted turtleneck work better as an under-layer? Will the button-down feel less stuffy if I cuff the sleeves and unbutton the top buttons?

I’m not suggesting you keep things that you genuinely dislike or that make you feel uncomfortable! But if a piece still has potential, I find that a bit of experimentation can go a long way.

If a piece is just not feeling totally “you”…

Try pairing it with a tried-and-true item in your closet. This is a suggestion that two podcast guests — personal stylist Sophie Strauss and Stylebook co-founder Jess Atkins — have shared and it has worked wonders for me.

Another approach is to bring in a piece that has the opposite feel. For example, if a dress is feeling too soft for your style, what would the outfit look like if you brought it a moto jacket? What if you wore it with a pair of leather boots or sneakers?

This is also where your style words can come in handy! My current style words are feminine, structured, and grounded. So if a blouse is feeling too frilly, I add in a structured blazer. Or if a structured outfit is feeling too stuffy, I’ll add in something like a raffia bag to ground it down or a feminine shoe to make it feel a bit lighter.

A piece can be totally transformed when paired with the right complementary — or juxtaposed — pieces.

Step two: separate out clothes in good condition

Now for the “no’s” or the “maybe’s” that just are not working, let’s talk about how to responsibly declutter these items!

The best approach is going to depend on the item (i.e. how desirable it is), the amount of time you have to rehome it, and if you want to get a financial return or not.

Here are your options from highest to lowest effort. Note that there are some links below that are affiliate links — as always, I only share organizations and brands I love that I think you’d love too.

Resell it yourself

  • Effort: high — you’ll need to photograph and upload the item to a marketplace, handle customer communications, and ship it out
  • Financial potential: high relative to the resale value of the piece
  • Best for: items with resale value that’d be worth the shipping cost
  • Where? Online marketplaces like Poshmark, Depop, Vinted, Mercari, Vestiaire Collective, or Ebay.

Consign it locally

  • Effort: moderate
  • Financial potential: moderate to low, depending on the percentage your local consigner keeps
  • Best for: seasonal items with resale value; check which brands and styles your local consignment shop takes
  • Where? Search for “consignment shops near me” or peruse the ratings to read the experiences sellers have had

Swap or share with a friend

  • Effort: moderate
  • Financial potential: none, but you might get a new-to-you piece
  • Best for: items your friend would love (I’d suggest sending pictures beforehand to a friend or in a friend group to see if anyone would be interested OR next time you see them in person you can show the pieces to them)
  • Where? In person with a friend

Go to a clothing swap

  • Effort: moderate
  • Financial potential: none, but you’ll get new-to-you pieces (and it can be fun!)
  • Best for: it depends on the swap, but any item in good condition
  • Where? Search for “clothing swaps near me” or search on event platforms like Eventbrite; I also suggest following any local sustainable fashion organizations to stay updated on events near you!

Direct donations

  • Effort: moderate
  • Financial potential: none, but you’ll feel confident your donations are actually getting used by those in most need of them
  • Best for: specific items (e.g., gently used coat to a homeless shelter or workwear to a women’s center; this will be specified by the organization)
  • Where? Search for local organizations that might be in need of clothing, like a women’s center, homeless shelter, or refugee agency. They should be listing out the items that the organization is currently in need of. If you’re uncertain, contact them first! Sending in unwanted items may lead to that piece getting tossed.

Consign it with an online consignment store

  • Effort: low
  • Financial potential: moderate to none (some stores give $0 for fast fashion items)
  • Best for: items you don’t have time to resell individually
  • Where? Online stores like ThredUp take all types of items; The RealReal consigns luxury and designer items

General donations

  • Effort: low
  • Financial potential: none (plus, these places often have more than enough clothing so the pieces may not actually be resold)
  • Best for: desirable pieces that have a high chance to get resold (though again, sell-through rates do tend to be quite low at charity shops so I try to avoid this approach)
  • Where? A charity shop that resells clothing in order to raise money for their cause, like a Goodwill, Salvation Army, or British Red Cross shop

Tips for donating and selling clothing:

No matter which approach you use, keep these tips in mind to maximize the life of your old clothing!

  • The piece is going to have the best chance at a new life when you’re reselling it in-season. (Donating or selling a parka in summer doesn’t have great odds!) If an item I want to rehome is out of season, I’ll store it away in a bin for later.
  • Wash the piece before selling, swapping or donating. This sounds basic, but it was clear at the clothing swap I just co-hosted that not everyone is doing this!!
  • If the piece is damaged beyond repair, stained, or worn-out, take it to step 3 instead!

Step 3: recycle or upcycle old clothes in poor condition

Some garments are simply unwearable. This is the toughest category to handle, given the lack of real textile recycling options. But there are still ways to make the most of these textiles!

If you want to try a creative project, old garments can become upcycling supplies. For a variety of upcycling classes, check out Skillshare or Domestika.

If you don’t want to upcycle these pieces yourself, SUAY LA has “Suay it Forward” Textile Recycling Bags.

They don’t export these textiles, but actually upcycle them in-house, which allows for full transparency.

A bag is $20, but in exchange you get a $20 credit to put towards one of their upcycled pieces. (I have my eye on one of their throw pillows!)

Suay LA textile recycling bag

Another option for recycling your old clothes is Trashie. Their take-back bag works similarly — you purchase a bag for $20, fill it up with old clothing in any condition and they’ll sort through the textiles to find the next best use for that piece.

Trashie doesn’t have as much transparency into their process as SUAY LA does because they work with 40 external partners (rather than handling everything in-house), but they’ve been posting more behind-the-scenes videos on their Instagram page.

The benefit of Trashie is that you unlock dozens of rewards when you purchase one of their Take-Back Bags, rather than just getting credit at one store.

I do hope that in the future, all textile recycling options with full transparency will be free or at least that textiles can be accepted with the rest of our household recycling! I understand that paying for textile recycling is not accessible to everyone, even if you get a store credit in exchange.

In that case, you could contact your local thrift store to see how they handle unwearable garments. Textile-to-textile recycling is extremely rare so ask if they downcycle them domestically (preferable) or if they export them, making them a problem for communities in the Global South to deal with (avoid).

Step 3b: what to do with old underwear

Even tougher than repurposed unwearable clothing? Rehoming worn underwear! Almost nowhere excepts these items, and for very understandable reasons!

That said, here are two options to check out:

The Bra Recyclers is a social enterprise that donates new bras and repurposes used bras.

Subset has an underwear recycling program. The underwear brand works with a partner that downcycles these textiles into things like insulation and carpet bedding. Similar to SUAY LA and Trashie, you pay upfront but get a store credit in exchange. I’ve used Subset’s underwear recycling program in the past when I made the switch from synthetic underwear to their organic cotton pieces for health reasons.

My Final Thoughts on Managing Old Clothes Responsibly

When the reality of what it really takes to responsibly manage my old clothes sank in for me, it really made me way more intentional about my purchases. (There is no real “away”, because away is a real place, inhabited by real humans.)

That said, of course there will always be times where our clothing just doesn’t work for us anymore. That’s part of life — lifestyles change, identities change, needs change, sizes change, and even the climate we live in changes — and keeping 100% of our clothes forever is simply not realistic.

So when the time does come to declutter a few pieces, I turn to the three steps above to maximize their use and ensure they are getting a second (or third!) life that I can feel good about.

The post What to Do With Old Clothes, Sustainably appeared first on .

What to Do With Old Clothes, Sustainably

Continue Reading

Green Living

56 Environmental Innovations in the 56 Years Since Earth Day Began

Published

on

The first Earth Day was celebrated on April 22, 1970 — 56 years ago — and, goodness, how the world has changed since then. We’ve come a long way since the days of burning our trash and pumping our gas guzzlers with leaded gasoline. In honor of those 56 years, here are 56 important changes and milestones since the first Earth Day.

Legislation

The U.S. government has led much of the environmental charge, starting with the implementation of the EPA (1) in July 1970. Later that year, the Clean Air Act (2) targeted air pollutants, followed by the Clean Water Act (3) in 1972 and the Endangered Species Act (4) in 1973.

Some lesser-known national laws included the Safe Water Drinking Act (5) in 1974, the Resource Conservation and Recovery Act (6) in 1976, the Toxic Substances Control Act (7) in 1976, the National Energy Act (8) in 1978, and the Medical Waste Tracking Act (9) in 1988.

In some cases, states have led the charge. Oregon passed the first bottle bill (10) in 1971, Minnesota’s Clean Indoor Air Act (11) was the first law to restrict smoking in public places (1975), and Massachusetts required low-flush toilets (12) for construction and remodeling in 1988.

Green Innovations: The Early Years

In order to comply with all the laws from the 1970s, we needed new technology to ensure consumers could adhere to the new standards. Consider:

  • The “Crying Indian” PSA debuts in 1971 (13)
  • Dichlorodiphenyltrichloroethane (DDT) gets banned in 1972 (14)
  • The energy-efficient compact fluorescent light bulb launches in 1973 (15)
  • Cars begin displaying fuel economy labels in the mid-1970s (16)
  • In 1975, all cars are manufactured with catalytic converters to limit exhaust emissions (17)
  • Chlorofluorocarbons are banned from aerosol cans starting in 1978 (18)
  • The first curbside recycling program begins in New Jersey in 1980 (19)
  • In 1986, McDonald’s switches from foam to paper food containers (20)
  • Mercury is removed from latex paint in 1990, providing a viable alternative to banned lead paint (21)
  • Earth911 launches the first U.S. recycling directory in 1991 (22)
  • Energy Star certification debuts in 1992 for appliances and electronics (23)
  • The U.S. Green Building Council begins in 1993 (24)

The Political Movement

The Green Party (25) launched in 1984, which was just the beginning of green issues entering the mainstream. One Percent for the Planet (26) was founded in 2002 to challenge businesses to donate to environmental causes, and the ISO 14001 standard (27) established environmental management. Companies are now facing pressure to allow employee telecommuting (28).

Things really developed after the release of Al Gore’s An Inconvenient Truth (29) in 2006. NBC debuted Green Week (30) in 2007. Carbon offsets (31) alleviated corporate green guilt. Bisphenol A (32) made us all question plastic purchases. Hybrid vehicles (33) generated tax credits and gas savings. Plastic bag bans gave rise to a reusable bag (34) craze. Fracking (35) and the Dakota Access Pipeline (36) were two of the most hotly contested news stories of the decade, at least until the 2016 election.

Green Tech: The Next Wave

Smart house controller on tablet and happy family

In the past 10 years, emerging green tech has made eco-friendly a way of life, including:

  • LED light bulbs (37)
  • Portable solar panels on backpacks and watches (38)
  • Plant-based plastics (39)
  • Motion sensor lighting (40)
  • Faucets with automatic shut-off (41)
  • Low volatile organic compound (VOC) paint (42)
  • Recycled plastic clothing (43)
  • Ride-sharing mobile applications (44)
  • Natural cleaning products (45)
  • Biodiesel engine vehicles (46)
  • Food waste composting (47)
  • Portable air purifiers (48)
  • Europe’s Green Deal introduced global recyclables shipping regulations to reduce pollution in low-income nations (49)
  • Corporate borrowers headed toward $500 billion in bond financings for the renewables transition (50)
  • President Biden rejoins the Paris Climate Accord on his first day in office. (51)

The Latest Five: 2022–2026

The pace of innovation has not slowed. Five more milestones have reshaped the environmental landscape since that 51st Earth Day:

  • The Inflation Reduction Act (52), signed into law in August 2022, became the largest climate investment in U.S. history, directing roughly $370 billion toward clean energy tax credits, EV incentives, methane reduction, and domestic clean manufacturing. Analysts projected it will drive more than $4 trillion in cumulative capital investment over a decade and put the U.S. on track for a 40% emissions reduction by 2030. Sadly, many of its key provisions have been defunded or eliminated by the Trump Administration.
  • The Kunming-Montreal Global Biodiversity Framework (53), adopted by 188 governments in December 2022, set the most ambitious biodiversity protection commitment in history. Its headline “30×30” target calls for conserving 30% of the planet’s land, freshwater, and ocean areas by 2030, a goal that would require doubling current protected land coverage and quadrupling marine protections.
  • America’s first commercial direct air capture plant (54), opened by Heirloom Carbon Technologies in Tracy, California in November 2023, marked the arrival of atmospheric carbon removal at commercial scale on U.S. soil. The plant uses limestone to absorb CO₂ directly from the air, with the captured carbon injected into concrete for permanent storage. In May 2024, Climeworks activated the world’s largest direct air capture facility, the Mammoth plant in Iceland, with a design capacity to remove 36,000 tons of CO₂ per year.
  • Solid-state batteries (55), a next-generation alternative to conventional lithium-ion technology, moved from laboratory promise toward commercial reality between 2022 and 2026. Unlike liquid-electrolyte batteries, solid-state versions are less flammable, achieve higher energy density, and degrade more slowly. In early 2025, Mercedes-Benz began road-testing a prototype EV powered by a lithium-metal solid-state cell that extended driving range 25% over comparable liquid-battery models. Multiple automakers and cell manufacturers now target commercial production between 2027 and 2030.
  • Perovskite and tandem solar cells (56), a new photovoltaic technology that pairs conventional silicon with thin perovskite layers, pushed solar efficiency into territory once considered theoretical. By 2024, tandem cells in laboratory settings exceeded 34% efficiency — well above the roughly 22% ceiling of standard silicon panels only a few years ago. manufacturers in Asia and Europe began scaling pilot production lines. Because perovskite cells can be printed on flexible substrates, they open the door to solar surfaces on buildings, vehicles, and everyday objects that conventional panels cannot reach.

The past 56 years have been huge when it comes to saving the environment. Expect more to come, including a resurgent EV industry, nuclear fusion, regenerative agriculture, restorative forestry, and more, as costs and the cool factor improve.

Editor’s Note: Originally published on April 18, 2018, this article was most recently updated in April 2026.

The post 56 Environmental Innovations in the 56 Years Since Earth Day Began appeared first on Earth911.

https://earth911.com/eco-tech/eco-friendly-innovations/

Continue Reading

Green Living

Earth911 Inspiration: Forests Are the Lungs of Our Land

Published

on

This week’s quotation is from Franklin D. Roosevelt, 32nd president of the United States: “A nation that destroys its soils destroys itself. Forests are the lungs of our land, purifying the air and giving fresh strength to our people.”

Earth911 inspiration posters: Post them and share your desire to help people think of the planet first, every day. Click the poster to get a larger image.

Forests are the lungs of our land ...

The post Earth911 Inspiration: Forests Are the Lungs of Our Land appeared first on Earth911.

https://earth911.com/inspire/earth911-inspiration-forests-are-lungs-of-land/

Continue Reading

Green Living

How To Grow Vegetables With Aquaponics

Published

on

One gallon of water. That’s roughly how much a well-run aquaponics system uses to grow a kilogram of leafy greens. Compare that to the 30 or more gallons required by conventional soil farming, according to a 2024 comparative greenhouse study, and the benefits are inescapable.

That efficiency is why aquaponics — raising fish and growing plants in a closed-loop system — has moved from backyard novelty to subject of serious agricultural research. A 2025 review in Sustainable Environment Research documents how integrating AI, IoT sensors, and automation into aquaponics can significantly enhance system efficiency, increase food production, reduce operational costs, and minimize waste. For home gardeners in 2026, the barrier to entry has never been lower. All-in-one kits start under $100, water quality testing has become more accurate and affordable, and the science behind getting both fish and plants to thrive is well-established.

Nitrification is at the heart of every aquaponics system. Fish produce ammonia-rich waste. Beneficial bacteria convert that ammonia first into nitrite, then into nitrate — a form plants can absorb directly. The plants filter the water. The cleaned water returns to the fish. Once the system cycles, the main inputs are fish food and occasional water top-offs.

This article contains affiliate links. If you purchase an item through one of these links, we receive a small commission that helps fund our Recycling Directory.

1. Invest in Reliable Equipment

  • The core hardware list hasn’t changed much — but what’s available at each price point has improved considerably.

    Aquarium or tank. A 100-gallon tank remains the recommended starting point for a serious home system. It gives you flexibility in fish species, plant density, and system stability. Acrylic tanks are lighter and optically clearer; glass tanks are heavier but scratch-resistant. Expect to pay $300–$600 for a quality 100-gallon tank. Search current options on Amazon.

    If you’re new to aquaponics, the AquaSprouts Garden Kit is a well-reviewed all-in-one beginner system that fits a standard 10-gallon aquarium. It includes a grow bed, submersible pump, mechanical timer, and light bar mounting system, and costs $75–$90. The aquarium itself is sold separately.

    Canister filter. For a 100-gallon aquaponics tank, target 500–600 gallons per hour (GPH) of water turnover, well above what the tank volume alone would suggest, because the fish load demands high filtration. The Fluval FX2 (~$269 on Amazon) is consistently top-rated for tanks up to 100 gallons, featuring 4-stage filtration, Smart Pump technology that auto-adjusts flow, and a built-in water change system. A solid budget alternative is the Penn-Plax Cascade 1000 (~$199 on Amazon), which handles up to 100 gallons, recirculating the water more than twice an hour.

    Air pump. Dissolved oxygen is critical for fish health and for the beneficial bacteria driving nitrification. A quality air pump — or a canister filter with an integrated spray bar — will keep oxygen levels stable. A 2025 review in Reviews in Aquaculture found that micro-nano bubble (MNB) aeration increased butterhead lettuce yield by 35% compared to conventional diffusers, and raised nitrate concentration in the water. MNB systems are commercially available but not yet mainstream for home setups, so a conventional air pump remains the practical choice for most beginners.

    Grow lights (optional, system-dependent). Indoor systems need supplemental lighting. Full-spectrum LED grow lights have dropped substantially in price and energy draw. Look for LED bars with daylight-spectrum output (5000–6500K) sized to your grow bed. Search LED grow lights on Amazon.

    Water heater (optional). Tilapia require 70–85°F. If your space runs cooler, a submersible aquarium heater is essential. Search aquarium heaters on Amazon.

2. Choose Your Setup

Three system types work at home scale. The choice depends on available space, target crops, and tolerance for complexity.

Media bed are recommended for beginners. Plants grow in a bed of inert media, such as expanded clay pebbles, gravel, or lava rock, positioned above or beside the fish tank. A pump floods the bed periodically, then drains back. The media supports roots and houses beneficial bacteria. Research from Texas A&M confirmed media beds are the most forgiving system for beginners and support the widest range of crops, including fruiting vegetables like tomatoes and cucumbers. The Oklahoma Cooperative Extension Service provides detailed DIY build plans.

A 2025 study found that carbonized rice husks and cocopeat as grow media can yield five times more crop than traditional expanded clay aggregate (LECA), though they decompose over time and require more frequent replacement.

Nutrient film technique (NFT). A thin stream of water flows continuously through PVC tubes past plant roots dangling inside. Excellent for herbs, lettuce, and small greens in tight or vertical spaces; the tubes can be wall-mounted. Vertical aquaponics setups can increase productivity per unit area by up to 160% compared to horizontal systems, based on research with strawberries and basil. NFT kits are available on Amazon for both DIY and complete systems.

Raft (deep water culture). Plants float on foam rafts with roots submerged directly in nutrient-rich water drawn from the fish tank. They produce a higher yield than NFT for leafy greens, but requires more robust filtration because solids aren’t removed by a media bed. More common in semi-commercial operations than small home setups. Check options on Amazon.

A growing range of IoT sensors let you track pH, dissolved oxygen, ammonia, and temperature continuously from your phone. WiFi pH/EC meters designed for hydroponic and aquaponic systems are now in the $60–$120 range. For beginners, manual weekly testing is fine. For anyone running a system unattended or scaling up, continuous monitoring significantly reduces the risk of a water quality crash.

illustration of aquaponics concept
The fish fertilize the plants and the plants clean the water for the fish in an aquaponic system. Image credit: GRACE Communications Foundation and Mother Jones, CC0, via Wikimedia Commons

3. Add the Fish

An aquaponics system will support many species of fish. Several of the most popular options are:

  • Tilapia: The most common aquaponics fish for good reason. Tilapia tolerate temperature swings, pH variation, and elevated ammonia better than most species. They grow quickly (typical harvest: 6–8 months), are inexpensive to stock, and provide a dual harvest of vegetables and protein. Best for warm indoor or greenhouse systems (70–85°F).
  • Koi: Popular ornamental choice. Koi tolerate poor water quality and are hardy once established, but they’re susceptible to a range of pathogens and aren’t typically harvested for food. Well-suited to media bed systems where water quality is easier to maintain.
  • Bluegill, perch, and catfish. Solid edible alternatives to tilapia in cooler climates where tilapia’s warmth requirements are a challenge. Texas A&M’s fish species selection guide covers temperature ranges, feed conversion ratios, and disease susceptibility for home-scale species in detail.

These are great options, but you can also consider carp, perch, largemouth bass, bluegills, guppies, and more. Purchase fish from a reputable aquaculture supplier or local fish hatchery when possible — disease-carrying fish is one of the fastest ways to crash a new system. Pet store fish are not certified disease-free.

4. Add the Plants

Like fish, the options are endless when deciding which vegetables to grow in your aquaponics system. Some popular options include broccoli, celery, cucumbers, and basil.

But because different plants require different conditions, you’ll want to select plants that will thrive in your setup. As Go Green Aquaponics explains, it is important to consider the following:

  1. System: What type of aquaponics system you will use – plants with no root structure do well in a raft setup, while root vegetables do well in a media bed.
  2. The optimal temperature and pH level for your fish and your plants – the closer the match, the more successful you’ll be.
  3. Environment: the amount of light, temperature and – if you’re setting up your system outside – rain the plants will get.
  4. How much space you have for plants versus how much space the plants need to grow.
  5. Plant-to-fish ratio: The more fish you plan on having, the more plants you need to absorb the nutrients.

5. Maintain Your System

Keeping healthy plants and fish will require regular maintenance. Some tips include:

  • Feed your fish two to three times daily in small amounts. Overfeeding is the most common cause of ammonia spikes in home systems. Uneaten food decomposes rapidly and overwhelms the beneficial bacteria that keep the system in balance.

    Test pH weekly. Target range is 6.4–7.4, with most systems running best around 6.8–7.0. The API Freshwater Master Test Kit (~$35 on Amazon) tests pH, ammonia, nitrite, and nitrate in one kit — the standard recommendation for aquaponics monitoring. For more serious systems, the LaMotte Aquaponics Water Test Kit (~$85 on Amazon) covers nine parameters including dissolved oxygen and carbon dioxide, and comes with a rugged carrying case. To raise pH naturally, dissolve a tablespoon of food-grade potassium carbonate (potash) in a bucket of system water, add it slowly to the tank, and retest after 24 hours before adding more.

    Test ammonia and nitrate weekly or biweekly. Ammonia should be below 2 ppm; nitrates should stay under 160 ppm. Elevated ammonia: feed less, increase aeration, or reduce fish density. High nitrates: add more plants or remove some fish.

    Mind the cycling period. A new system takes 4–6 weeks to fully cycle and for the bacterial colony to establish and nitrogen conversion to stabilize. Don’t increase fish load or plant density during this period. Ammonia and nitrite readings near zero consistently is your green light.

The following video from Rob Bob’s Aquaponics provides guidance on how to check the pH, ammonia levels, and nitrate levels.

Get Some Fish In Your Garden

Aquaponics is an easy and environmentally conscious way to grow produce and raise fish at the same time. It can be used to grow all your favorite leafy greens, and there are endless varieties of fish that will adapt well to this system. Just keep up with regular maintenance and aquaponics will prove to be a viable and sustainable new way to garden.

The science of aquaponics is advancing quickly. Three developments from recent peer-reviewed literature are worth knowing about, even if most aren’t yet practical for home systems:

Algae co-cultivation. Reviews in Aquaculture reports that introducing macroalgae such as Spirogyra spp. can nearly double plant yields compared to traditional aquaponic systems. Co-cultivating microalgae (Chlorella) with plants in raft systems also controls ammonia at twice the efficacy of non-algal systems. This is emerging research — not yet mainstream for home growers — but a promising direction for anyone looking to push yields further.

Decoupled system design. Research from the Journal of the World Aquaculture Society (2024) documents that decoupled systems, which separate the aquaculture unit from the hydroponic unit, allow optimized conditions in each component, resulting in better nutrient utilization and increased productivity compared to coupled designs. Decoupled systems allow independent pH management for fish and plants, which is otherwise a constant compromise in standard coupled setups. Commercially available decoupled systems are beginning to become available; for DIY builders, it’s a worthwhile design consideration when scaling up.

AI and IoT integration. A 2025 Sustainable Environment Research review emphasizes that monitoring strategies using artificial intelligence, the Internet of Things, and renewable energy can significantly enhance aquaponic system efficiency. For home growers, this means the WiFi monitoring systems mentioned in Step 2 are part of a broader wave of automation coming to small-scale aquaponics. The good news: prices will continue to drop.

Editor’s Note: This article was originally published on March 17, 2021, and updated in April 2026. Feature image of outdoor aquaponics system courtesy of Vasch~nlwiki, CC BY-SA 4.0, via Wikimedia Commons

About the Author

David Thomas is founder and editor-in-chief of Everything Fishkeeping, a fishkeeping and aquascaping magazine. He has been keeping fish since he was a child and has kept over 12 different setups. His favorite is his freshwater tank with Tetras and Loaches.

The post How To Grow Vegetables With Aquaponics appeared first on Earth911.

https://earth911.com/home-garden/grow-vegetables-with-aquaponics/

Continue Reading

Trending

Copyright © 2022 BreakingClimateChange.com