Connect with us

Published

on

The NAUTILUS camera team (Shannon and Julia) arrived with four camera systems to record beaked whale prey found off the island of Terceira at various depths. Our aim is to learn more about the life history, occurrence and behavior of the animals living in the deep sea in order to increase our understanding of the complex interactions between predator and prey of the local ecosystem and thus to be able to better protect it. On board the RV Meteor, we spent the first few days planning the deployment of the equipment with the crew to prepare the systems for their first voyage into the deep ocean of the Atlantic.

The Nautilus team, Shannon (left) and Julia (right) with one of the drifter systems shortly before being released into the water column to drift at a depth of 1000 m.

We have two types of camera systems. The “lander”, also affectionately known as CARL, sinks to the seafloor with a weight, where it then records everything that lives on and above the seafloor. After 24 hours, we send an acoustic signal from the ship, which releases the lander on the seafloor and the system floats back to the surface. We spot it floating at the surface and recover it with the help of the crew. Then, we analyze the videos. We also have a “drifter” system, also known as a DARC (Dar-cee). This floats freely between 750 – 1200 m in the water column and is moved through the water by the tides and the wind. With the help of a GPS, we can locate it after 24 hours and haul it back on board with a winch.

The lander shortly before deployed over board into 1700 m depth

The special feature of the NAUTILUS camera system is that we can film under white light and red light. The red light is not perceived by most deep-sea animals, which makes them less afraid to come close to the lens. We also use bait (fish or squid) to attract the animals, which they smell and come close to the camera to investigate. But that’s not enough for us! Another trick we use is an optical lure, the bioluminescent “eJelly”. Here we adopt a trick known as the “burglar alarm”. The principle is based on the observation of the deep-sea jellyfish Atolla. The Atolla emits a bioluminescent signal when it is attacked by a predator. This alerts other, bigger predators which then attack the Atolla jellyfish’s predator. This is how the Atolla jellyfish saves itself from its attacker. Isn’t it fascinating how animals evolved to have remarkable adaptations? Armed with all these tricks, we wanted to attract all sorts of things, and it worked!

Already after we got our first systems back on the boat, we were able to film jellyfish, crustaceans, squid and even sharks! All the data collected will be analyzed in the internal video laboratory at GEOMAR after our trip and the deep-sea animal species filmed will be documented. We are excited to see what we captured on film!

Thanks to all crew members and fellow scientists for a successful cruise on which we gained many new impressions!

The Nautilus Team,

Shannon and Julia

(A) A lantern shark sniffs the Landers’ bait at a depth of over 1700 meters. With the help of the lasers we can measure the animal which is estimated to be about 50 cm long. (B) An unidentified squid attacks the “eJelly” (emitting a bioluminescent blue ring at the top of the picture) while being filmed under red light at 750 m depth
A schematic overview of the drifter and lander systems.

Nautilus Camera System

Ocean Acidification

Between Storms and Science: Easter in the Labrador Sea (04.04.26–13.04.26)

Published

on

Between all the scientific work, we celebrated Easter on board, although the weather had other plans for us. Due to rough conditions, we weren’t able to carry out any CTD casts.

Photo: Sarah Tomae

Easter itself was spent in a mix of rest and small celebrations. Some of us enjoyed a long Easter breakfast with traditional Easter bread, while others took the opportunity to sleep in. In the evening, we gathered with both crew and scientists for a small celebration. The ship’s cook even organized a quiz, and those who answered correctly were rewarded with Easter chocolate.

The next day, the weather improved, and we began early with the recovery of K1, a 3,495-meter-long mooring in the middle of the Labrador Sea.

We joined the nautical officers on the bridge before sunrise to search for it. Fortunately, K1 has a floating buoy with a light, so we were able to spot it even in the dark. The actual recovery started at first light, and it began to snow while we were working.

Photo: Sarah Tomae, GEOMAR

Amid all the CTDs and mooring operations, there was also a personal highlight: my (Sarah’s) birthday. Although I’ve spent birthdays away from home before, this one felt especially unique, being so far out at sea, with only limited internet contact.

Normally, I work the 4-8 shift, but my incredibly kind shift team gave me the morning off. That meant I could sleep in and even find time to call family and friends back home. In the afternoon, I was surprised with my favourite cake, baked by Julia.

Our work continued with the mooring array at 53°N, which consists of seven moorings. So far, we have recovered five (K7, K8, K9, DSOW1 and DSOW2), and three of them have already been redeployed (K7, K8 and DSOW1,).

Deploying K7 turned out to be particularly tricky. On our first attempt, sea ice drifted toward us faster than expected, forcing us to recover nearly half of the mooring again. While the ship itself can handle drifting ice, deploying a mooring is much more delicate: a long cable with instruments and floats is released behind the ship before the anchor is dropped, allowing the system to sink into place.

Two days later, we tried again and this time, the deployment was successful.

Photo: Sarah Tomae

Afterwards, we moved closer to the sea ice, which was a highlight for many of us. Seeing the ice up close and even spotting a seal swimming nearby, made the experience unforgettable.

Photo: Sarah Tomae
Photo: Sascha Gniosdorz

Due to the continuing harsh weather, the decision was made to return to K1 and make use of an upcoming weather window for deployment the following day.

German:

Zwischen Stürmen und Wissenschaft: Ostern in der Labradorsee (04.04.26 – 13.04.26)

Zwischen all der wissenschaftlichen Arbeit haben wir Ostern an Bord gefeiert, auch wenn das Wetter andere Pläne für uns hatte. Aufgrund der rauen Bedingungen konnten wir keine CTD-Messungen durchführen (Messungen von Leitfähigkeit, Temperatur und Tiefe im Ozean).

Foto: Sarah Tomae

Ostern selbst war eine Mischung aus Erholung und kleinen Feierlichkeiten. Einige von uns genossen ein ausgedehntes Osterfrühstück mit traditionellem Osterbrot, während andere die Gelegenheit nutzten, etwas länger zu schlafen. Am Abend kamen Crew und Wissenschaftler*innen zu einer kleinen Feier zusammen. Der Koch organisierte sogar ein Quiz, und wer die Fragen richtig beantwortete, wurde mit Oster-Schokolade belohnt.

Am nächsten Tag besserte sich das Wetter, und wir begannen früh mit der Bergung von K1, einer 3.495 Meter langen Verankerung mitten in der Labradorsee. (Eine Verankerung ist eine lange, am Meeresboden befestigter Draht, der mit Instrumenten ausgestattet ist, um über längere Zeit Ozeandaten zu messen.)

Noch vor Sonnenaufgang gingen wir mit den nautischen Offizieren auf die Brücke, um nach ihr Ausschau zu halten. Glücklicherweise verfügt K1 über eine schwimmende Boje mit Licht, sodass wir sie bereits im Dunkeln entdecken konnten. Die eigentliche Bergung begann bei Tagesanbruch und es begann sogar zu schneien.

Foto: Sarah Tomae

Zwischen all den CTD-Einsätzen und Verankerungsarbeiten gab es auch ein persönliches Highlight: meinen (Sarahs) Geburtstag. Obwohl ich schon öfter Geburtstage fernab von zu Hause verbracht habe, war dieser besonders, so weit draußen auf dem Meer und mit nur eingeschränktem Internetkontakt.

Normalerweise arbeite ich in der 4-8 Uhr Schicht, aber mein unglaublich nettes Schichtteam hat mir den Morgendienst freigegeben. So konnte ich etwas länger schlafen und hatte sogar Zeit, mit Familie und Freunden zu Hause zu telefonieren. Am Nachmittag wurde ich dann noch mit meinem Lieblingskuchen überrascht, den Julia für mich gebacken hat.

Unsere Arbeit ging weiter mit dem Verankerungs-Array bei 53°, das aus sieben Verankerungen besteht. Bisher haben wir fünf geborgen (DSOW1, DSOW2, K7, K8 und K9), von denen drei bereits wieder ausgebracht wurden (DSOW1, K7 und K8).

Das Ausbringen von K7 erwies sich als besonders schwierig. Beim ersten Versuch trieb das Meereis schneller auf uns zu als erwartet, sodass wir fast die Hälfte der Verankerung wieder einholen mussten. Obwohl das Schiff selbst gut durch treibendes Eis navigieren kann, ist das Ausbringen einer Verankerung deutlich anspruchsvoller: Dabei wird ein langer Draht mit Messinstrumenten und Auftriebskörpern hinter dem Schiff ausgesetzt, bevor am Ende der Anker gelöst wird und das gesamte System absinkt.

Zwei Tage später versuchten wir es erneut, diesmal mit Erfolg.

Foto: Sarah Tomae

Anschließend fuhren wir näher an das Meereis heran, was für viele von uns ein besonderes Highlight war. Das Eis aus nächster Nähe zu sehen und sogar eine Robbe in der Nähe schwimmen zu beobachten, machte das Erlebnis unvergesslich.

Foto: Sarah Tomae
Foto: Sascha Gniosdorz

Aufgrund der weiterhin rauen Wetterbedingungen wurde schließlich entschieden, zu K1 zurückzukehren, um ein bevorstehendes Wetterfenster für die Ausbringung am nächsten Tag zu nutzen.

Between Storms and Science: Easter in the Labrador Sea (04.04.26–13.04.26)

Continue Reading

Ocean Acidification

Humans Just Flew Around the Moon This Week. But Would Babies Born There Ever Truly Feel Gravity? Ask Jellyfish Babies.

Published

on

This week, NASA’s Artemis II crew made history by flying around the Moon and returning safely to Earth, the first human journey to the Moon’s vicinity in more than 50 years. It was a stunning reminder that humanity is no longer just dreaming about living beyond Earth. We are actively rehearsing for it.

And that leads to a much stranger, deeper question: even if one day we build skyscrapers on the Moon, raise families there, and turn space into a place to live, will babies born away from Earth develop a normal sense of gravity? Or will their bodies learn the universe differently?

To explore that question, NASA once turned to an unexpected stand-in for human babies: jellyfish babies. On the STS-40 mission, scientists sent thousands of tiny jellyfish polyps into space because jellyfish, like humans, rely on gravity-sensing structures to orient themselves. The experiment asked a simple but profound question: if a living body develops in microgravity, will it still know how to handle gravity later?

The answer was both fascinating and unsettling. The jellyfish developed in space in large numbers, but once back under Earth’s gravity, the ones that had developed in microgravity showed far more pulsing abnormalities than the Earth-grown controls. In other words, their bodies formed, but their sense of balance did not seem to work quite the same way.

That is why this old jellyfish experiment still matters today. Before we imagine lunar cities, schools, nurseries, and generations born off-world, we need to ask not only whether humans can survive in space, but whether developing there changes how the body understands something as basic as up, down, and movement. Jellyfish babies cannot tell us everything about human children, but they may have given us one of the first clues that life born beyond Earth might not come home unchanged.

Reference: https://nlsp.nasa.gov/view/lsdapub/lsda_experiment/0c10d660-6b12-573d-8c3b-e20e071aed3b

Image: GEOMAR, Sarah Uphoff

Humans Just Flew Around the Moon This Week. But Would Babies Born There Ever Truly Feel Gravity? Ask Jellyfish Babies.

Continue Reading

Ocean Acidification

First Week of Cruise MSM142 – Into the Labrador Sea

Published

on

After a slight delay of the Maria S. Merian caused by late-arriving containers our research cruise MSM142 finally got underway. By last Tuesday (24.03.2026), the full scientific team had arrived in Nuuk, the capital of Greenland, and the ship reached port on Wednesday (25.03.2026) morning. That same day, scientists and technicians moved on board and immediately began preparations, assembling and testing our instruments. Although the mornings on Wednesday and Thursday were grey and overcast, the afternoons cleared up beautifully. This gave us valuable time to organize equipment on deck and store empty boxes back into the containers before departure.

Foto: Julia Pelle

Given the forecast of harsh conditions outside the fjord, we carried out the mandatory safety drill while still in harbour. This included practicing emergency procedures and boarding the lifeboat. After completing border control, we were finally ready to leave Nuuk. We set sail on March 27th, heading into the Labrador Sea to begin our mission. Even before starting scientific operations, we tested the setup for deploying our gliders without releasing them during the transit out of the fjord. Once we reached open waters, we were met by high waves the following morning. For some on board, this was their first experience under such rough sea conditions. Seasickness quickly became a challenge for a few, while scientific work had to be temporarily postponed due to the strong winds and sea conditions. Together with the crew, we discussed how best to adapt our measurement plans to the given weather conditions. On March 29th, we were finally able to begin our scientific program with the first CTD deployment. A CTD is an instrument used to measure conductivity, temperature, and depth, which are key parameters for understanding ocean structure.  

Foto: Julia Pelle

During the following night, we continued with additional CTD stations and successfully recovered two moorings: DSOW 3 and DSOW 4, located south of Greenland. These moorings carry instruments at various depths that measure velocity, temperature, and salinity. DSOW 4 was redeployed on the same day, while DSOW 3 followed the next day. In addition, the bottles attached to the CTD’s rosette can be used to collect water samples from any desired depth. These samples can be used, for example, to determine the oxygen content, nutrient levels, and organic matter.

Foto: Julia Pelle

Both are part of the OSNAP array, a network of moorings spanning the subpolar North Atlantic. On these moorings are a few instruments, for example microcats which measure temperature, pressure and salinity.

We then conducted around 25 CTD stations spaced approximately 3 nautical miles apart across an Irminger ring identified from satellite data. This high-resolution sampling was necessary to capture the structure of an Irminger Ring, which had a radius of about 12 km wide.

Foto: Julia Pelle

The days leading up to April 2nd were marked by very rough weather conditions. Life on board became both challenging and, at times, unintentionally entertaining sliding chairs were not uncommon. During the night from April 1st to April 2nd, winds reached 11 Beaufort with gusts up to 65 knots, forcing us to pause our measurements. Fortunately, conditions improved by morning, allowing us to resume our work. As well as with the help of the crew we had to adapt to the harsh weather conditions to continue our scientific work. On the 3rd of April, we were able to deploy a few gliders and one float. An ocean glider is an autonomous underwater Vehicle, which you can steer remotely and send to different locations, while it is measuring oceanographic key parameters.

Foto: Julia Pelle

This research cruise focuses on understanding small-scale processes in the ocean and their connection to the spring bloom, an essential phase in marine ecosystem in subpolar regions. Despite the challenging start, we have already gathered valuable data and look forward to the weeks ahead in the Labrador Sea. 

First Week of Cruise MSM142 – Into the Labrador Sea

Continue Reading

Trending

Copyright © 2022 BreakingClimateChange.com