India’s energy demand is growing in leaps and bounds. The country is progressing ahead and investing heavily in renewables. However, with this rising energy demand, coal is once again holding its ground stronger in the nation. The recent World Energy Outlook report revealed that,
“Coal is set to retain a strong position in the energy mix in India over the next decades.”
The Stated Policies Scenario (STEPS) assessed that approximately 60 GW of coal-fired capacity will be added to the net of retirements by 2030. This will surge electricity generation from coal by more than 15%.
The Coal Scenario of India
India is the world’s second-largest producer of coal, so coal is abundantly available in India. It holds a major 55% share of the country’s energy demand. The reality is, that replacing coal with 100% renewables is not happening anytime soon. The most significant factor that’s fueling coal demand is the rising population.
This manifests energy usage at homes, buildings, factories, and offices directly. Only Renewables like solar, wind, and hydro might not fulfill such a massive energy demand in a heavily populated country. This is why India’s indigenous sector – coal is so important.
World Energy Outlook has figured out:
“Generation from coal remains over 30% higher than that from solar PV even in a decade in which solar PV accounts for twice as much capacity, owing to the lower capacity factor of solar installations.”
2035 Coal Consumption Forecast
Some of the most energy-consuming sectors are going to experience a massive demand uptick. They are:
- The iron and steel sector can grow by 70%
- Cement output is expected to surge by 55%
- The stock of air conditioners can become 4-5X
Thus, the consumption of coal in industry can grow by 50% by 2035.

Source: World Energy Outlook
Will Rising Demand Ignite a Carbon Emission Surge?
This is the most inevitable question, and IEA has come up with an interesting analysis:
India’s GDP growth rate is currently 7.8%. Subsequently, the government has ambitiously set a target to have the third largest economy in the world by 2030, after the U.S. and China.
Any form of economic growth involves expanding infrastructure. Development in spaces and structures, new constructions, and increased transportation will require cement, steel, concrete, iron, fuel, power, etc. This can cause a sharp rise in energy demand and use of fossil fuels.
So, the answer is eventually becoming clear- and carbon emissions can substantially rise in the future as India strives to have a more powerful economy.
The US EPA quoted,
“India’s coal emissions are estimated to be 22 MtCO2e in 2020 and are expected to reach 45 MtCO2e in 2050.”
If Coal has a Future; India is Sustainably Mining It
However, the coal and lignite undertakings are responsibly handling the environmental impact of the coal mining process. The most widely used mitigation measures include recycling mined-out areas and carrying out extensive plantations in coal-rich regions.
The Ministry of Coal has been seriously taking steps to restore the land disrupted by mining. They have stabilized such lands and put them into useful purposes. The process is precisely known as, “ecological reclamation of mined land”. Some such measures are:
- reforestation of overburden dumps
- afforestation around mines
- restoring local flora and fauna
Notably these activities are planned in advance and the closure plans are approved by the ministry. They conduct them sidewise to minimize the carbon footprint post-closure of coal mines.
Improving the Air Quality
The Ministry highlighted innovative techniques like seed ball plantation, drone-based seed casting, and Miyawaki plantation that have been introduced in several mines. These techniques combat air pollution by “trapping” the enormous volume of dust particles blown off during mining. The entire process is monitored through remote sensing technology to ensure maximum efficiency.
Additionally, the latest technologies like surface miners, wheel washing, fog cannons, mist sprayers, mechanized road sweepers, CAAQMS, wet drilling, and dust suppression systems are also deployed to minimize dust generation. This improves the air quality of the surrounding areas of a coal mine.
Image: Surface Miner with water jets, Gevra OCP, SECL

Source: Ministry of Coal
India’s coal companies are also implementing several energy-efficient measures to reduce their carbon footprint. The Ministry of Coal said,
“By implementing various energy efficiency measures, Coal/lignite PSUs have envisaged to create additional carbon offset potential of 1 Lakh Ton/annum.”

Source: World Energy Outlook
The Bureau of Energy Efficiency (BEE) Announces Offset Mechanism to Combat Emissions
As we discuss sustainability in the Indian coal mining sector, another important piece of news that made headlines is India’s national carbon market and trading carbon credits. We discovered from S&P Global what the Bureau of Energy Efficiency (BEE) said recently.
BEE’s Director, Saurabh Diddi, stated that by March 2025, they will unveil the methodologies for sectors included in phase 1 of the domestic voluntary market under India’s Carbon Credit Trading Scheme.
S&P Global noted that India has immense opportunities in the domestic voluntary market and is the largest supplier of carbon credits in the existing international voluntary carbon markets.
The methodologies can encourage industries and corporations to commit to “voluntary” emission reduction targets. Diddi added that such pledges would help boost demand for carbon credits. Simply put, the whole purpose is to generate demand in the domestic offset market.
This diverse range of decarbonization strategies including sustainability in Indian coal mining are meant to achieve net zero emissions by 2070. Additionally, these offset mechanisms can reduce 45% of its GHG emissions by 2030.
The post Coal to Stay in India’s Energy Mix: Can Sustainable Mining Control Emissions? appeared first on Carbon Credits.
Carbon Footprint
Carbon credit providers vs marketplaces: who does what
Carbon credit providers vs marketplaces is the first comparison many buyers try to make. In this comparison, a carbon credit provider is the project developer: the company that originates credits from its own projects and sells them directly. A carbon credit marketplace is a platform that lists credits from many projects at published prices.
![]()
Carbon Footprint
Democrats who call climate change an emergency should not defend a permitting system too slow to build the clean energy that would address it.”
Democrats, Take The Deal. New York Times editorial, Nov. 12.
Carbon Footprint
Designing an Insetting Program: A Step-by-Step Playbook for Procurement
Insetting program design starts with your supplier map. The carbon claim comes much later.
Consider a coffee procurement team that funds a farm intervention before checking its sourcing data. The supplier aggregates coffee lots from several regions. The buyer lacks farm-level traceability. Another purchaser expects to report the same outcome. A more attractive project brochure solves none of these problems.
If the distinction between a value-chain intervention and a purchased credit is still open, read CCC’s Insetting vs Offsetting guide before you set the brief.
Insetting program design begins with the purchasing relationship and works outward. You need to decide 1) where an intervention belongs, 2) what business problem it addresses, 3) who pays for it, 4) how results will be measured, and 5) what the evidence will let you say about them. This five-step playbook turns that sequence into a procurement plan.
Step 1: Insetting program design starts with supplier mapping
Start with the commodities that matter most to your Scope 3 inventory and sourcing continuity. Ask finance for spend by supplier, sustainability for the emissions baseline, and category managers for origin and volume records. Then identify which suppliers can trace material to a jurisdiction, sourcing region, producer group, or individual land-management unit.
The level of traceability affects what you can account for. Under the GHG Protocol Land Sector and Removals Standard, the spatial boundary for purchased land-based products depends on the traceability associated with each volume. Farm-specific factors or removals require physical traceability through an acceptable chain-of-custody model. A contract with a tier-one trader, by itself, does not establish a link to the farms behind its deliveries.[1]
Build a first-pass table with five columns: commodity and annual volume; supplier and origin; current traceability level; land-use and production risks; and the business owner who can change the purchasing terms. Mark missing data plainly. A blank cell is cheaper to fix before a program starts than after a claim is drafted.
If your company sets an SBTi Forest, Land and Agriculture target (FLAG), keep its land-related target boundary separate from energy and industry emissions. The current FLAG guidance also requires relevant companies to assess primary deforestation-linked commodities in their value chains.[2]
Step 2: Choose a commodity and jurisdiction for a pilot
Select one supply corridor where the sourcing connection can be established and procurement has a reason to stay. A useful pilot has repeat purchases, suppliers willing to share records, an intervention matched to a diagnosed problem, and a defined plan to measure the result. Carbon potential alone is a poor selection rule if the supplier cannot deliver the crop your business needs.
Compare candidate regions on land-use risk, supplier concentration, local rights and tenure, the availability of baseline data, and exposure to drought, erosion, or forest conversion. Check the relevant legal requirements separately. A nature project does not satisfy a due-diligence obligation merely because it has a carbon method attached.
Consider a coffee buyer sourcing from two districts. In the first, producer-group records identify the farms, while recent dry seasons have increased rejected green coffee lots. In the second, deliveries pass through several intermediaries and farm origins are unknown. Pilot shade management in the first district, with local agronomic advice and quality checks built into the plan. The buyer can trace purchases there and test the intervention against a defined sourcing problem.
Use a short decision memo to record why the selected corridor beats the alternatives, what remains uncertain, and what would stop the pilot. That memo is the first control against a project drifting toward whatever happens to photograph well.
Step 3: Design the supplier engagement and commercial model
The intervention needs an owner on each side of the contract. Decide who supplies planting material or training, who maintains the practice, who bears the cost if a harvest disappoints, and how long the buyer expects to purchase from participating suppliers. Where smallholders participate, budget cash flow and technical support for practices that offer a later return.
Put these terms in a supplier agreement or pilot addendum. It should cover eligible farms and volumes, consent to data collection, access for monitoring, any land or carbon rights that matter, benefit sharing, and what happens if the purchasing relationship ends. Ask local counsel and producer representatives to review the arrangement. The Accountability Framework is a useful reference for supply-chain work involving forests, ecosystems, and human rights.[3]
Avoid assigning an automatic carbon benefit to the buyer. The contract should say which party has the right to report each outcome, how overlapping claims will be checked, and how any issued credits will be handled. A reduction reported in a buyer’s inventory cannot simply be sold for someone else’s offset claim without an accounting review. SBTi FLAG guidance excludes purchased credits used as offsets from near-term FLAG target achievement.[2]
Set commercial measures beside environmental ones: delivered volume, rejection rate, supplier retention, and procurement cost. They tell you whether the program works as a supply-chain investment, even if carbon accounting takes longer to resolve.
Step 4: Build monitoring, reporting, and verification before rollout
Agree on the baseline and data flow before paying for a full rollout. Identify the land units or sourcing regions in scope, the practices that change, the records suppliers already keep, and the additional measurements the program requires. Decide which data can come from field visits, transaction records, or remote sensing, and who checks each source.
For carbon, separate three questions. Did the practice happen? Did emissions or removals change under an applicable method? Can the buyer attribute a defensible share to its purchased goods without double counting? The GHG Protocol’s 2026 guidance includes dedicated chapters on spatial boundaries, data and methods, evaluating actions, credited outcomes, and assurance.[1] These are distinct jobs. A photograph of a planted tree answers only part of the first.
CCC’s MRV and Additionality article explains the separate evidence questions a project reviewer will ask.
Create an evidence file for every reporting period: dated supplier and farm records, purchase volumes, methods and emission factors, uncertainty, quality checks, and changes from the baseline. Specify who can challenge the data and how corrections are recorded. If a project also seeks credit certification, keep project accounting and corporate inventory accounting separate. The GHG Protocol says its land standard focuses on entity-level inventories and does not set the rules for credit certification.[4]
Start with the minimum viable measurement design that can survive review. Add complexity when the pilot tells you which data actually changes a decision.
Step 5: Decide what can be reported and claimed
Insetting program design needs reporting rules before the marketing copy. Procurement, sustainability, finance, and legal should agree on four distinct outputs: operational performance; observed land or nature outcomes; inventory effects, if the accounting criteria are met; and any separately issued credits. One dashboard can display them, but they should not share a single unqualified headline.
SBTi FLAG guidance allows certain land-based removals within a company’s operations or supply chain to contribute to FLAG pathways, subject to criteria including permanence, traceability, data quality, and allocation. It does not allow purchased offsets to meet near-term FLAG targets.[2] Eligibility therefore depends on evidence and the applicable target rules, not on calling an activity “insetting.”
Draft a claims register. For each proposed sentence, record the period, boundary, data owner, calculation method, reviewer, and whether the result is measured, estimated, or still a goal. If the evidence supports only “we funded a pilot with 200 farms,” say that. Do not turn a funding fact into a verified emissions reduction.
What good looks like by year three
Treat year three as a review point, not a promised payback date. A mature pilot should have mapped participating supply volumes, a stable supplier agreement, a repeatable data collection process, and a comparison of commercial and environmental results against the baseline. It should also have a documented answer for outcomes that cannot be included in the buyer’s inventory.
Scale only where the pilot improves a sourcing decision and the evidence can follow the product. If neither condition holds, redesign the intervention or change the corridor. A disciplined program can conclude that a site is unsuitable. That is useful procurement intelligence.
Discuss your insetting program with CCC
Carbon Credit Capital designs nature-based supply chain investments around sourcing needs and measurable sustainability outcomes. Schedule a consultation with our carbon and sustainability experts to map your tier-one supplier network, FLAG exposure, and first pilot decision.
Sources
[1] GHG Protocol, Land Sector and Removals Standard, version 1.1, and companion Guidance, June 2026: https://ghgprotocol.org/land-sector-and-removals-standard ; https://ghgprotocol.org/land-sector-and-removals-guidance
[2] Science Based Targets initiative, Forest, Land and Agriculture Science-Based Target-Setting Guidance, version 1.2, March 2026, especially pp. 16–17, 37, and 41: https://sciencebasedtargets.org/resources/files/SBTiFLAGGuidance.pdf
[3] Accountability Framework initiative, Accountability Framework and guidance for companies: https://accountability-framework.org/
[4] GHG Protocol, Frequently Asked Questions: Land Sector and Removals Standard, questions 10 and 18: https://ghgprotocol.org/blog/frequently-asked-questions-land-sector-and-removals-lsr-standard
-
Climate Change1 year ago
Guest post: Why China is still building new coal – and when it might stop
-
Greenhouse Gases1 year ago
Guest post: Why China is still building new coal – and when it might stop
-
Renewable Energy1 year agoSending Progressive Philanthropist George Soros to Prison?
-
Greenhouse Gases1 year ago
嘉宾来稿:探究火山喷发如何影响气候预测
-
Climate Change2 years agoAnalysis: China’s CO2 falls 1% in Q2 2024 in first quarterly drop since Covid-19
-
Climate Change1 year ago嘉宾来稿:探究火山喷发如何影响气候预测
-
Renewable Energy5 months agoSend a Bible to a Starving Child
-
Green Living2 years agoOur Picks for the Top 2024 Black Friday and Cyber Week Sales From Sustainable Brands

