Connect with us

Published

on

Climate startup Reverion, a German company specializing in biogas-based carbon removal, has secured several major offtake agreements through Frontier, the advanced carbon removal buyer coalition. The deals mark a significant milestone for the company as it works to commercialize its solid oxide fuel cell (SOFC) technology, which captures and permanently stores CO₂ while producing clean electricity.

Under the new commitments, Frontier buyers—including Google, McKinsey, H&M Group, Autodesk, Workday, and others—will pay $41 million for 96,000 tons of permanent CO₂ removal between 2027 and 2030.

Frontier’s carbon removal portfolio 

frontier carbon removal
Source: Frontier

These agreements strengthen the growing belief that biogas-based carbon removal can be both scalable and economically attractive when combined with high-efficiency energy production.

How Reverion’s Fuel Cell System Turns Biogas into Permanent Carbon Removal

Reverion, a 2022 spin-off from the Technical University of Munich, has created a system that generates clean electricity and captures carbon from biogas at the same time. Farmers produce biogas by placing manure, crop leftovers, and food waste into anaerobic digesters. These digesters create a gas mix that contains methane and CO₂.

  • The company’s solid oxide fuel cell (SOFC) converts the methane in this gas directly into electricity with very high efficiency.
  • During this reaction, the carbon in the gas separates into a pure CO₂ stream.
  • The system then liquefies this CO₂ and sends it for permanent geological storage.

Traditional biogas systems burn the gas in engines, lose energy, and release most of the carbon back into the air. Some even leak methane, which traps far more heat than CO₂. Reverion avoids these problems by capturing carbon from both methane and CO₂ in the biogas. As a result, the system increases the amount of carbon removed and cuts emissions at the source.

By pairing efficient power generation with full carbon capture, Reverion turns everyday biogas into a dependable pathway for long-term carbon removal.

Reverion CARBON REMOVAL Biogas
Source: Frontier

Energy, Hydrogen, and New Revenue Streams for Farmers

The press release highlighted that, today, more than 120,000 biogas plants operate worldwide, but many still use old engines with low efficiency. And Reverion’s SOFC gives farmers a major upgrade. It reaches about 74% fuel-to-electricity efficiency—one of the highest levels in the industry. This lets farmers produce more electricity from the same biogas, lower their energy bills, and earn extra money by selling clean power.

The system also adds flexibility. When electricity prices drop, often during times of strong wind and solar output, the fuel cell can run in reverse to make green hydrogen. Farmers can sell this hydrogen or use it on their own farms, creating another income source.

By delivering clean energy, flexible operation, and permanent carbon removal, Reverion offers a strong alternative to combustion engines and renewable natural gas upgrading systems.

Frontier Unlocks: Why BiCRS Matters in Carbon Removal Portfolios

Biomass Carbon Removal and Storage (BiCRS) is emerging as a strong contender for long-duration carbon removal. It includes several pathways such as BECCS, bio-oil sequestration, biomass injection, and now biogas-based fuel cell systems.

Frontier explains how BiCRS stands out for the following reasons:

  • Lower costs: Plants capture CO₂ naturally and at no cost. Many BiCRS systems also use existing waste streams, which reduces input costs.
  • Clear verification: Technologies like BECCS and biomass injection are easier to measure and verify compared with more experimental removal pathways.
  • Near-term scalability: Bio-oil and biomass injection can grow quickly, helping meet the rising demand for carbon removal supply.
Frontier
Source: Frontier

However, BiCRS is not without challenges. The biggest concern is sustainable biomass sourcing. Poor practices—such as removing too much crop residue, clear-cutting forests, or heavy fertilizer use—can harm biodiversity, damage soils, or increase emissions. Because of these risks, carbon removal purchasers must follow strict sustainability guidelines when sourcing biomass.

There is also a durability question for some BiCRS methods. Some biomass burial or sinking approaches could decompose over time, reversing the stored carbon. Frontier funds several R&D projects to evaluate long-term durability.

Finally, the BiCRS market is expected to be highly fragmented. Feedstock types differ by region, and the best removal pathway varies based on geography, transportation options, and local policy. Most BiCRS facilities also operate at a modest scale, meaning the market will rely on many distributed projects rather than a handful of giants.

Even so, BiCRS delivers several co-benefits. These include on-site clean energy production, lower fossil fuel use, reduced methane emissions, nutrient recycling for croplands, and destruction of harmful pollutants like PFAS.

BiCRS Dominates CDR Market

As per the CDR.fyi report, biomass-based carbon removal is leading the carbon removal market. In 2025, BiCRS projects delivered 97% of durable carbon dioxide removals, showing their major impact. BECCS, a key BiCRS pathway, is set to grow at a 19.3% CAGR from 2024 to 2030.

  • In the US alone, BiCRS could remove over 800 million tonnes of CO2 per year at costs below $100 per ton, with potential to exceed 1 billion tonnes with expanded biomass use.

The carbon removal market reached $3.9 billion in Q2 2025, with biomass projects accounting for 99% of transactions. Growth is fueled by rising demand for sustainable energy, expanding investment, and supportive policies.

bircs
Source: CDR.FYI

Why Reverion’s Model Stands Out

Reverion’s approach offers compelling advantages that support its rapid market adoption:

  • Large potential impact: With over 120,000 biogas sites worldwide, the theoretical removal potential from biogas could exceed 2 gigatons per year by 2040, according to IEA projections. Reverion could capture a meaningful share of this, especially alongside other BiCRS technologies.
  • Full-stream carbon capture: Most systems capture only the CO₂ portion of biogas. Reverion captures carbon from both CO₂ and methane, effectively doubling the removal impact.
  • World-class electrical efficiency: Its 74% efficiency ranks among the highest globally, increasing economic returns for operators.
  • Low methane leakage: Because methane is converted on-site, the system avoids pipeline leaks often associated with renewable natural gas.
  • Strong market demand: Reverion already holds 60 pre-orders and 120 letters of intent, signaling strong momentum.
Reverion biogas
Source: Reverion

As the world accelerates efforts to scale permanent carbon removal, technologies like Reverion’s offer a promising path—combining high-efficiency clean energy production with durable, verifiable carbon storage at biogas sites around the world.

The post Frontier Backs Climate Startup Reverion for 96,000 Tons of Biogas-Based Carbon Removal appeared first on Carbon Credits.

Continue Reading

Carbon Footprint

Carbon credit providers vs marketplaces: who does what

Published

on

Carbon credit providers vs marketplaces is the first comparison many buyers try to make. In this comparison, a carbon credit provider is the project developer: the company that originates credits from its own projects and sells them directly. A carbon credit marketplace is a platform that lists credits from many projects at published prices.

Continue Reading

Carbon Footprint

Democrats who call climate change an emergency should not defend a permitting system too slow to build the clean energy that would address it.”

Published

on

Democrats, Take The Deal. New York Times editorial, Nov. 12.

Continue Reading

Carbon Footprint

Designing an Insetting Program: A Step-by-Step Playbook for Procurement

Published

on

Insetting program design starts with your supplier map. The carbon claim comes much later.

Consider a coffee procurement team that funds a farm intervention before checking its sourcing data. The supplier aggregates coffee lots from several regions. The buyer lacks farm-level traceability. Another purchaser expects to report the same outcome. A more attractive project brochure solves none of these problems.

If the distinction between a value-chain intervention and a purchased credit is still open, read CCC’s Insetting vs Offsetting guide before you set the brief.

Insetting program design begins with the purchasing relationship and works outward. You need to decide 1) where an intervention belongs, 2) what business problem it addresses, 3) who pays for it, 4) how results will be measured, and 5) what the evidence will let you say about them. This five-step playbook turns that sequence into a procurement plan.

Step 1: Insetting program design starts with supplier mapping

Start with the commodities that matter most to your Scope 3 inventory and sourcing continuity. Ask finance for spend by supplier, sustainability for the emissions baseline, and category managers for origin and volume records. Then identify which suppliers can trace material to a jurisdiction, sourcing region, producer group, or individual land-management unit.

The level of traceability affects what you can account for. Under the GHG Protocol Land Sector and Removals Standard, the spatial boundary for purchased land-based products depends on the traceability associated with each volume. Farm-specific factors or removals require physical traceability through an acceptable chain-of-custody model. A contract with a tier-one trader, by itself, does not establish a link to the farms behind its deliveries.[1]

Build a first-pass table with five columns: commodity and annual volume; supplier and origin; current traceability level; land-use and production risks; and the business owner who can change the purchasing terms. Mark missing data plainly. A blank cell is cheaper to fix before a program starts than after a claim is drafted.

If your company sets an SBTi Forest, Land and Agriculture target (FLAG), keep its land-related target boundary separate from energy and industry emissions. The current FLAG guidance also requires relevant companies to assess primary deforestation-linked commodities in their value chains.[2]

Step 2: Choose a commodity and jurisdiction for a pilot

Select one supply corridor where the sourcing connection can be established and procurement has a reason to stay. A useful pilot has repeat purchases, suppliers willing to share records, an intervention matched to a diagnosed problem, and a defined plan to measure the result. Carbon potential alone is a poor selection rule if the supplier cannot deliver the crop your business needs.

Compare candidate regions on land-use risk, supplier concentration, local rights and tenure, the availability of baseline data, and exposure to drought, erosion, or forest conversion. Check the relevant legal requirements separately. A nature project does not satisfy a due-diligence obligation merely because it has a carbon method attached.

Consider a coffee buyer sourcing from two districts. In the first, producer-group records identify the farms, while recent dry seasons have increased rejected green coffee lots. In the second, deliveries pass through several intermediaries and farm origins are unknown. Pilot shade management in the first district, with local agronomic advice and quality checks built into the plan. The buyer can trace purchases there and test the intervention against a defined sourcing problem.

Use a short decision memo to record why the selected corridor beats the alternatives, what remains uncertain, and what would stop the pilot. That memo is the first control against a project drifting toward whatever happens to photograph well.

Step 3: Design the supplier engagement and commercial model

The intervention needs an owner on each side of the contract. Decide who supplies planting material or training, who maintains the practice, who bears the cost if a harvest disappoints, and how long the buyer expects to purchase from participating suppliers. Where smallholders participate, budget cash flow and technical support for practices that offer a later return.

Put these terms in a supplier agreement or pilot addendum. It should cover eligible farms and volumes, consent to data collection, access for monitoring, any land or carbon rights that matter, benefit sharing, and what happens if the purchasing relationship ends. Ask local counsel and producer representatives to review the arrangement. The Accountability Framework is a useful reference for supply-chain work involving forests, ecosystems, and human rights.[3]

Avoid assigning an automatic carbon benefit to the buyer. The contract should say which party has the right to report each outcome, how overlapping claims will be checked, and how any issued credits will be handled. A reduction reported in a buyer’s inventory cannot simply be sold for someone else’s offset claim without an accounting review. SBTi FLAG guidance excludes purchased credits used as offsets from near-term FLAG target achievement.[2]

Set commercial measures beside environmental ones: delivered volume, rejection rate, supplier retention, and procurement cost. They tell you whether the program works as a supply-chain investment, even if carbon accounting takes longer to resolve.

Step 4: Build monitoring, reporting, and verification before rollout

Agree on the baseline and data flow before paying for a full rollout. Identify the land units or sourcing regions in scope, the practices that change, the records suppliers already keep, and the additional measurements the program requires. Decide which data can come from field visits, transaction records, or remote sensing, and who checks each source.

For carbon, separate three questions. Did the practice happen? Did emissions or removals change under an applicable method? Can the buyer attribute a defensible share to its purchased goods without double counting? The GHG Protocol’s 2026 guidance includes dedicated chapters on spatial boundaries, data and methods, evaluating actions, credited outcomes, and assurance.[1] These are distinct jobs. A photograph of a planted tree answers only part of the first.

CCC’s MRV and Additionality article explains the separate evidence questions a project reviewer will ask.

Create an evidence file for every reporting period: dated supplier and farm records, purchase volumes, methods and emission factors, uncertainty, quality checks, and changes from the baseline. Specify who can challenge the data and how corrections are recorded. If a project also seeks credit certification, keep project accounting and corporate inventory accounting separate. The GHG Protocol says its land standard focuses on entity-level inventories and does not set the rules for credit certification.[4]

Start with the minimum viable measurement design that can survive review. Add complexity when the pilot tells you which data actually changes a decision.

Step 5: Decide what can be reported and claimed

Insetting program design needs reporting rules before the marketing copy. Procurement, sustainability, finance, and legal should agree on four distinct outputs: operational performance; observed land or nature outcomes; inventory effects, if the accounting criteria are met; and any separately issued credits. One dashboard can display them, but they should not share a single unqualified headline.

SBTi FLAG guidance allows certain land-based removals within a company’s operations or supply chain to contribute to FLAG pathways, subject to criteria including permanence, traceability, data quality, and allocation. It does not allow purchased offsets to meet near-term FLAG targets.[2] Eligibility therefore depends on evidence and the applicable target rules, not on calling an activity “insetting.”

Draft a claims register. For each proposed sentence, record the period, boundary, data owner, calculation method, reviewer, and whether the result is measured, estimated, or still a goal. If the evidence supports only “we funded a pilot with 200 farms,” say that. Do not turn a funding fact into a verified emissions reduction.

What good looks like by year three

Treat year three as a review point, not a promised payback date. A mature pilot should have mapped participating supply volumes, a stable supplier agreement, a repeatable data collection process, and a comparison of commercial and environmental results against the baseline. It should also have a documented answer for outcomes that cannot be included in the buyer’s inventory.

Scale only where the pilot improves a sourcing decision and the evidence can follow the product. If neither condition holds, redesign the intervention or change the corridor. A disciplined program can conclude that a site is unsuitable. That is useful procurement intelligence.

Discuss your insetting program with CCC

Carbon Credit Capital designs nature-based supply chain investments around sourcing needs and measurable sustainability outcomes. Schedule a consultation with our carbon and sustainability experts to map your tier-one supplier network, FLAG exposure, and first pilot decision.

Sources

[1] GHG Protocol, Land Sector and Removals Standard, version 1.1, and companion Guidance, June 2026: https://ghgprotocol.org/land-sector-and-removals-standard ; https://ghgprotocol.org/land-sector-and-removals-guidance

[2] Science Based Targets initiative, Forest, Land and Agriculture Science-Based Target-Setting Guidance, version 1.2, March 2026, especially pp. 16–17, 37, and 41: https://sciencebasedtargets.org/resources/files/SBTiFLAGGuidance.pdf

[3] Accountability Framework initiative, Accountability Framework and guidance for companies: https://accountability-framework.org/

[4] GHG Protocol, Frequently Asked Questions: Land Sector and Removals Standard, questions 10 and 18: https://ghgprotocol.org/blog/frequently-asked-questions-land-sector-and-removals-lsr-standard

Continue Reading

Trending